How to use a Mist Maker or Pond Fogger

How To Use a Mist Maker:

Using your new Ultrasonic Mist Maker is easy! Simply insert the silver transducer into the float/ buoy and drop it in some water. It will instantly pump out an endless stream of .5 micron mist to help raise your humidity. To set up you fogger just follow these simple steps:

• Make sure you have your float, the fogging transducer, and power transformer that come in your House of Hydro starter kit. 
• Drop the silver ultrasonic transducer into the black float. Tip: Make sure the inner part of the float is fully pressed into the outer shell of the float. If not, the transducer can sit too high in the water causing sporadic operation. 
• Plug the silver transducer into the black power transformer and tighten any securing rings if your model has them. Make sure the plug is fully inserted to ensure a good connection. 
• Plug in the black transformer to a GFI wall outlet. Any time you are working with electricity, GFI breakers should be used. You can also use a GFI Power strip as well. TIp for making a humidifier: When using the mist maker with a humidistat, plug your GFI powers strip into the humidistat. Then plug the our waterproof fan and mist maker into the power strip to control them simultaneously. 
• Drop the unit into any body of water, disinfectant,  fertilizer, bug spray, fragrance, ect. DO NOT USE DISTILLED WATER unless necessary. Anything over 20ppm is ok. The water level sensor needs some solids in the water to make a good connection. 
• The unit will turn on immediately when placed in water. A thick fog will be generated until you run out of water. A low water sensor will keep your fogger safe, but should NOT be relied upon to shut down the fogger. Sufficient water levels are needed to keep the fogger cool. Water 105F or more will increase wear on the discs and transducer. 
• Units can also be hooked to timers or humidistats to control humidity in greenhouses and homes. Check out our extensive FAQ Section for more info!

 

These Ultrasonic mist makers are great for DIY Ultrasonic Humidifiers backyard ponds and waterfalls. The House of Hydro only sells commercial quality units. They do not use any LED's on the mist maker, so they do not have the bright colorful lights. Units with LED's do not last due to water getting in the light's and shorting the unit out. No led's give you the cool natural look when using a mist maker for water features like a pond or fountain. Water foggers are great for fountains and ponds,  but it can also be used for stuff like humidifying plants and greenhouses, amphibians and reptiles, or creating spooky fog for Halloween.  Create a dry ice look on the surface of the water with the ultrasonic mister, or replace that costly fog machine and just use water!

Using a mist Maker is easy! Float one in the middle of a pond or fountain to add mist to the surface of the water to create ambiance or add one to a greenhouse for added humidity and healthier plants. These are very popular among orchid growers and Mycologist/ mushroom farming, and home humidification. Using these for hydroponic/ fogponic applications is also very common.  

    It can be used in almost any type of fluid, and will begin to make mist as soon as it is added. Thanks to an auto shut off, your water fogger will shut off when you are out of water. However, you should not rely on your water level sensor to turn it off. Plenty of water to keep the fogger cool is important. 

     Mist Makers are safe for fish tanks and other living things. Foggers are also safe for use in terrariums and reptile enclosures.  A 15' long cord ensures easy placement and installation.